Turning the unit on or off, Initializing unit settings, Getting started – Garmin 5008 User Manual
Page 6

2
GPSMAP
®
4000/5000 Series Owner’s Manual
Getting Started
Getting Started
Power
connector
Marine video
connector
NMEA 2000
connector
NMEA 083
connector
Garmin Marine
Network
connectors
Turning the Unit On or Off
To turn the unit on, press and release the
Power
key. When the Warning screen appears, select
I Agree
to open the Home screen.
NOtE: The first time you turn on your unit, you must go through a setup sequence. See “
.
”
To turn the unit off, press and hold the
Power
key.
Warning Screen
Home Screen
Initializing Unit Settings
The first time you turn your unit on, you must configure a series of initial settings. These settings
must also be configured when restoring factory settings.
NOtE: You can change these settings later using the Configure screen.
Language—select the language to display on your screen.
Welcome—select
OK
.
Position Format—specify the coordinate system to use for location readings.
time Format—specify whether you want the time shown in a 12-hour, 24-hour, or UtC
(Universal Time Code) format.
time Zone—select your time zone.
Units—specify units for on screen measurements as Statute, Metric, or Nautical.