GE 1019070 - Manual (Page 25)

2.2.12 Events command group
The events command group controls the alarm notification via traps and/or e-mail.
Command Parameters Description
Show the alarm notification configuration showevents
Configure the alarm notification for a specific event
event [row] [e-mail] [trap]
[row] Alarm ID
[e-mail] 0 = no e-mail notification for this alarm
1 = send e-mail on alarm (de)activation
[trap] 0 = no trap sent for this alarm
1 = send trap on alarm (de)activation
2.2.13 Log command group
The log command group allows to access the logs maintained by the SNMP/Web adapters.
Command Parameters Description
Dump the System log to the console syslog
Dump the UPS log to the console upslog
Dump the System and UPS log to the FTP area logdump
Clear the UPS event log clearlog
Modifications reserved Page 25/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter