GE 1019070 - Manual (Page 20)

2.2.7 Smtp command group
The smtp command group allows to configure the e-mail sending functionality for e-mail notification of
UPS events and alarms:
Command Parameters Description
showsmtp Show detailed e-mail settings
on | off
Enable/disable email functionality
on
E-mail alert enabled
off E-mail alert disabled
email-alert
[seconds]
Set timeout for TCP communication with SMTP server
[seconds]
Timeout in seconds (range 5-60 seconds)
smtp-timeout
smtp-server [hostname]
Set SMTP server address
[hostname] hostname/IP-address of the SMTP server
NOTE: using hostnames requires DNS connection.
email-authen on | off
Enable/disable authentication for email server
on
E-mail server requires authentication
off E-mail server does not require authentication
email-account [user]
Set email server account
[user] Username for e-mail server authentication
email-passwd [pwd]
Set email server password
[pwd] Password for e-mail server authentication
smtp-sendername
Set the 'mail from:' header
[sender] E-mail address (63 chars max)
NOTE: This may be a critical parameter, as some SMTP
servers require a valid sender address within a specified
domain. Confirm the exact requirement with your service
provider or IT function.
[sender]
Add a recipient address
[e-mail] [e-mail] E-mail address (63 chars max) addrcpt
NOTE: Maximum 8 recipients can be defined.
delrcpt [e-mail]
Delete a recipient address
[e-mail] E-mail address (63 chars max)
Send a test mail
sendemail [msg]
[msg] Test message to be send
Modifications reserved Page 20/58
OPM_CNT_SNM_BAS_CRD_1GB_V012.doc Operating Manual SNMP/Web Adapter