GoVideo DP 5050 - Manual (Page 25)

25
Change Password [DVD]
To change the Parental Control password:
1 Press SETUP in Stop mode.
2 Press  /  to select “Custom Setup”, then
press PLAY/SEL.  .
3 Press  /  to select “Password”, then press
PLAY/SEL.  .
4 Enter your old password, then press
PLAY/SEL.  .
• The factory pre-set password is “0000”.
5 Enter your new password, then press
PLAY/SEL.  .
6 Re-enter your new password to verify it, then
press PLAY/SEL.  .
To return to the Setup menu
Press  .
To exit the Setup menu
Press SETUP or select “Exit Setup” on the
Setup Menu screen.
Parental Control [DVD]
The Parental Control feature enables you to block
playback of movies based on their rating. For
example, if you set the rating level to PG-13, the
player will block playback of movies rated PG-13,
R, NC-17 and X unless the correct password is
entered.
• You can only use the Parental Control feature
with rated DVD discs.
1 Press SETUP in Stop mode.
• You must remove any disc loaded in the
player to change the Parental Control setting.
2 Press  /  to select “Custom Setup”, then
press PLAY/SEL.  .
3 Press  /  to select “Parental Ctrl”, then
press PLAY/SEL.  .
4 Enter a 4-digit password, then press
PLAY/SEL.  .
• The factory pre-set password is “0000”.
• You must enter “0000” to set the rating for the
first time when purchasing your DVD from the
store.
5 Press  /  to select the desired rating and
press PLAY/SEL.  .
To return to the Setup menu
Press  .
To exit the Setup menu
Press SETUP or select “Exit Setup” on the
Setup Menu screen.
Custom Setup
: Move : Select SETUP: Quit
Parental Ctrl
Password ...
Angle Mark
Default
Old: _ _ _ _
New: _ _ _ _
Verify: _ _ _ _
Custom Setup
: Move : Select SETUP: Quit
Parental Ctrl
Password ...
Angle Mark
Default
1
2
3: PG
4: PG13
5
Custom Setup