GoVideo DP 5050 - Manual (Page 24)

24
Audio Setup
: Move : Select SETUP: Quit
Digital Out SPDIF/PCM
SPDIF/RAW
Off
Digital Audio Output [DVD]
The digital audio output jack (labeled “Coaxial”) is
used to output the audio signal recorded on DVD
discs to an external amplifier/receiver. The player
provides three options for this audio signal:
• SPDIF/PCM - Select if you are using a 2-
channel digital amplifier.
• SPDIF/RAW - Select if you are using a Dolby
Digital 5.1 or DTS capable amplifier.
• Off - Select if you are not using the Coaxial
audio output.
1 Press SETUP in Stop mode.
2 Press  /  to select “Audio Setup”, then
press PLAY/SEL.  .
3 Press  /  to select “Digital Out”, then press
PLAY/SEL.  .
4 Press  /  to select your preferred Digital
Out setting.
5 Press PLAY/SEL.  .
WARNING:
• Do not set “Digital Out” to “SPDIF/RAW”
unless you are connecting the player to an
A/V amplifier/receiver with Dolby Digital (AC-
3) decoding capability.
• High volume sound may damage your
hearing as well as the speakers.
To return to the Setup menu
Press  .
To exit the Setup menu
Press SETUP or select “Exit Setup” on the
Setup Menu screen.
Audio Setup