GIGABYTE GA-7VTXE - Manual (Page 43)

BIOS Setup
4 3
Integrated Peripherals
AMIBIOS SETUP - INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard FDC :Auto
OnBoard Serial Port 1 :Auto
OnBoard Serial Port 2 :Auto
Serial Port2 Mode :Normal
OnBoard Parallel Port :Auto
Parallel Port Mode :ECP
Parallel Port IRQ :Auto
Parallel Port DMA :Auto ESC: Quit : Select Item
OnBoard IDE :Both F1 : Help PU/PD+/-/ : Modify
OnBoard MC'97 Modem :Auto F5 : Old Values (Shift)F2: Color
OnBoard Creative Sound :Enabled F6 : Load Fail-Safe Defaults F8:Flash Utility
OnBoard LAN Chip :Enabled F7 : Load Optimized Defaults
Figure 9: Integrated Peripherals
On Board FDC
Auto Set On Board FDC is Auto (Default Value).
Disabled Disabled On Board FDC
Enabled Enabled On Board FDC
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address (Default Value).
3F8/COM1 Enable onboard Serial port 1 and address is 3F8.
2F8/COM2 Enable onboard Serial port 1 and address is 2F8.
3E8/COM3 Enable onboard Serial port 1 and address is 3E8.
2E8/COM4 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.