GIGABYTE GA-7VTXE - Manual (Page 24)

GA-7VTXE/GA-7VTXH Motherboard
2 4
< > Move to previous item
< > Move to next item
< > Move to the item in the left hand
< > Move to the item in the right hand
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and
Option Page Setup Menu - Exit current page and return to Main Menu
<+/PgUp> Increase the numeric value or make changes
<-/PgDn> Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page Setup Menu
Reserved
Reserved
Reserved
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu
Load the default CMOS value from BIOS default table, only for Option Page Setup
Menu
Load the Setup Defaults
Reserved
Reserved
Save all the CMOS changes, only for Main Menu
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the
basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
ENTERING SETUP
Power ON the computer and press immediately will allow you to enter Setup. If the message
disappears before you respond and you still wish to enter Setup, restart the system to try again by turning
it OFF then ON or pressing the “RESET” bottom on the system case. You may also restart by
simultaneously press - - keys.
CONTROL KEYS
Chapter 3 BIOS Setup