Grandstream Networks HT502 - Manual (Page 6)

Grandstream Networks, Inc. HT-502 User Manual Page 6 of 31
Firmware Version 1.0.1.21 Last Updated: 12/2008
T ABLE 1: D EFINITIONS OF THE HT502 C ONNECTORS
Power Cable Power adapter connection
WAN Port (RJ-45) Connect to the internal LAN network or router.
LAN Port (RJ-45) Connect the LAN port with an Ethernet cable to your PC.
RESET Factory Reset button. Press for 7 seconds to reset factory default settings.
PHONE1 (RJ-11) FXS port to be connected to analog phones / fax machines.
PHONE2 (RJ-11) FXS port to be connected to analog phones / fax machines.
There are five (5) LED buttons that help you manage the status of your HandyTone.
T
ABLE 2: D EFINITIONS OF THE HT502 LED S
LEDs
POWER LED Indicates Power. Remains ON when power is connected
WAN LED Indicates LAN (or WAN) port activity
LAN LED Indicates PC (or LAN) port activity
PHONE1 / PHONE2 LED Indicate status of the respective FXS Ports-PHONE1 /
PHONE2 on the back panel
Busy – ON (Solid Green)
Available – OFF
Slow blinking FXS LEDs indicates voicemail for that port.
NOTE: All LEDs display green when ON. Slow blinking of WAN and LAN LED together indicate the
product in firmware upgrading or provision stat
e.
Figure 2: HT502 Connection Diagram
z
Internet
ADSL/Cable
Modem Ethernet
WAN
LAN
FXS
Fax
Cordless
Phone
Analog Phone
FXS
Fax
Cordless
Phone
Analog Phone