Grandstream Networks HT502 User Manual
Page 15
Grandstream Networks, Inc.
HT-502 User Manual
Page 15 of 31
Firmware Version 1.0.1.21
Last Updated: 12/2008
Configuring the HT502 Via Web Browser
HT502 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT502 through a web browser such as
Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS is not
included).
A
CCESS THE
W
EB
C
ONFIGURATION
M
ENU
The HT502 HTML configuration page can be accessed via LAN or WAN ports.
•
F
ROM THE
LAN
PORT
:
1. Directly connect a computer to the LAN port
2. Open a command window on the computer
3. Type in “ipconfig /release”, the IP address etc becomes 0
4. Type in “ipconfig /renew”, the computer gets an IP address in 192.168.2.x segment by default
5. Open a web browser, type in the default IP address of the LAN port.
http://192.168.2.1
. You
will see the log in page of the device.
•
F
ROM THE
WAN
PORT
:
1. Follow table 4 to find the WAN side IP address.
2. Open a web browser, type in the WAN side IP address – for example:
http://HT502-WAN-IP-Address
Note:
•
WAN side HTTP access is disabled by default for security reason. You can enable HTTP access
on the configuration page by setting “WAN side HTTP access” to be YES.
•
Initial access to the configuration pages is always from the LAN port. The instructions are listed
above.
•
The IVR announces 12 digits IP address, you need to strip out the leading “0” in the IP address.
For ex. IP address: 192.168.001.014, you need to type in
http://192.168.1.14
in the web browser.
Once the HTTP request is entered and sent from a web browser, the user will see a log-in screen. There
are two default passwords for the login page:
User Level:
Password:
Web pages allowed:
End User Level
123
Only Status and Basic Settings
Administrator Level
admin
Browse all pages
The password is case sensitive with maximum length of 25 characters. The factory default password for
End User and administrator is “123” and “admin” respectively. Only an administrator can access the
“ADVANCED SETTING”, “FXS PORTs” configuration pages. Please reference the GUI pages using the
following link:
http://www.grandstream.com/user_manuals/GUI/GUI_HT502.rar
.