GE 25826GC - Manual (Page 44)

44
NOTE: Press exit button to return to standby mode.
CID E
RRORS
If there is an error in the transmission of information to your phone,
ERROR or INCOMPLETE DATA shows in the display. If you are not
subscribed to CID service, or it is not working properly,
NO DATA shows in
the display.
A
NSWERING
S
YSTEM
S
ET
U
P
This section shows you how to set up your answering machine to receive
incoming calls. Answering system setup may only be done at the base.
T
URNING THE
A
NSWERING
S
YSTEM
O
FF AND
O
N
1. Make sure the unit is not in TALK mode.
2. Press the ans on/off button, you will hear “ ANSWER ON” or
“ ANSWER OFF”.
3. The MESSAGES indicator lights when the answering system is on. The
indicator and the corresponding mailbox blink when you have new
messages in that mailbox.
NOTE: The answering system displays “- -” when it is off.
V
OICE
I
NSTRUCTIONS
If you need additional assistance, press the review (rew) button while in
standby mode and follow the voice instructions.
R
ECORDING THE
O
UTGOING
A
NNOUNCEMENT
Before using your answering system, you should record an outgoing
announcement (the announcement caller hear when your answering
system answers a call). A customized outgoing announcement can be
NO CALLS
CALLER LIST