GE 25826GC - Manual (Page 36)

36
5. Repeat step 5 in Storing a Name and Number in Memory.
6. Press the memory button again to confirm the entry. STORED shows
on the display for 2 seconds and the unit returns to standby mode.
NOTE: If the redial number has more than an 24 digits, it cannot be
stored in memory. “UNABLE TO STORE” is displayed.
I
NSERTING A
P
AUSE IN THE
D
IALING
S
EQUENCE
If a pause is needed to wait for a dial tone press the # pause button on
the touch-tone pad to insert a delay in dialing sequence of a stored
telephone number (for example, after you dial 9 for an outside line, or
wait for a computer access tone.) Each pause counts as one digit and
shows as
“P” in the dialing sequence.
R
EVIEWING
, C
HANGING OR
D
ELETING
S
TORED
N
UMBERS
T
O
R
EVIEW
:
1. Make sure the phone is OFF (not in talk mode).
2. Press the memory button, and the display either shows EMPTY or the
number of stored records.
3. Press the CID/VOL ( or ) button to review the memories.
T
O
C
HANGE
:
1. Repeat the steps from 1 to 3 in Reviewing, Changing or Deleting Stored
Numbers.
2. Press the memory button, the display shows ENTER NAME.
STORED 50
MEMORY
PETER CHAN
317 ‐ 123 ‐ 4567
MEMORY