Garmin 100 BLUE - Manual (Page 34)

26
Unit Operation
Beeper
The ‘Beeper’ fi eld contains three settings: ‘Off,’ ‘Alarms Only,’ and ‘Key
& Alarm.’
To change the Beeper Setting:
1. Highlight the ‘Sys’ tab on the Setup Menu.
2. Highlight the ‘Beeper’ fi eld and press ENTER.
3. Choose ‘Off,’ ‘Alarms Only,’ or ‘Key, Alarm,’ then press ENTER to accept
the setting.
NMEA Output
The Fishfi nder 100 Blue has the ability to output information about
Depth, Speed, and Water Temp for display on another NMEA-compatible
device.
To activate/deactivate the NMEA Output:
1. Highlight the ‘Sys’ tab on the Setup Menu.
2. Highlight the ‘NMEA Output’ fi eld and press ENTER.
3. Choose ‘Off’ or ‘On,’ then press ENTER to accept the setting.
Language
To select a Language:
1. Highlight the ‘Sys’ tab on the Setup Menu.
2. Highlight the ‘Language’ fi eld and press ENTER.
3. Use the Arrow Keys to select the desired language from the list and
press ENTER to accept the setting.
Setup Menu: System Tab
Beeper Selections
NMEA Output Selections
FF 100 Blue.indd 09/18/01, 2:59 PM 26