Garmin 100 BLUE - Manual (Page 14)

6
Installation
Wiring Harness Installation (continued)
If your boat does not have a fuse block, the unit can be wired directly
to the battery. Make sure the 2-Amp in-line fuse supplied with the unit
is installed.
The Fishfi nder 100 Blue can be connected to another piece of NMEA-
compatible electronic equipment. If equipped with a capable transducer
and speed sensor, the Fishfi nder 100 Blue sends depth, temperature and
speed information that could be used by, or displayed on another device.
Connecting a Transducer to Multiple Sensors
Installing the Wiring Harness
Speed Temp Transducer
Power/Data er/Data
Connection Connection
2-Amp In-Line Fuse
FF 100 Blue.indd 09/18/01, 2:58 PM 6