Automatic humidity control, Locking the controls, About the controls and settings – GE WineChiller User Manual
Page 6
6
Consumer Support
Tr
oubleshooting T
ips
Operating
Instructions
Safety Instructions
Installation
Instructions
Care and Cleaning
About the controls and settings.
The wine chiller can be locked using the
spring-loaded lock located above the door.
As a safety feature, the key for the spring-
loaded lock is automatically ejected and
will not remain in the lock in either the
open or closed position.
Key-Ejecting Lock
The inside of the wine chiller
automatically maintains the necessary
level of humidity to protect wine corks
from drying out. As a result, frost may
form on the inner surfaces. See Care and
Cleaning for instructions on removing
excessive frost buildup.
Automatic Humidity Control
This feature allows you to lock the controls so
the temperature settings cannot be changed. The
interior light will still function.
To lock the controls, press and hold the
RED WINE and INTERIOR LIGHT pads at the
same time for 3 seconds. The word LOC
will appear in the display to indicate the
lockout feature has been activated. The
display will then go back to showing the
actual temperature. Anytime a
temperature pad is pressed while the
lockout feature is activated, LOC will
appear in the display.
To unlock the controls, simply press and
hold the RED WINE and INTERIOR LIGHT
pads at the same time for 3 seconds.
Locking the Controls
Press the INTERIOR LIGHT pad to turn the
interior light on or off.
If you turn on the light and do not turn
it off, it will automatically turn off after
one hour.
Wine Chiller Light