Grizzly G0547 - Manual (Page 24)

-22- G0547 Combo Sander
Serious personal injury
could occur if you con-
nect your machine to the
power source during the
maintenance process.
DO NOT connect the
machine to the power
source while performing
any maintenance on this
machine. !
Your safety is important! Please follow the
warnings below during this entire section: Check for the following conditions before
each use:
• Loose table bolts.
• Worn or damaged sanding discs or
belts.
• Worn or damaged wires.
• Any other condition that could hamper
the safe operation of this machine.
Perform the following tasks at the scheduled
time intervals:
After Each Use
• Wipe off the sawdust build-up from the
table surface.
• Turn off power switch and remove the
switch key.
Weekly
• Wipe a lubricant such as SLIPIT ® onto
the table.
Long-Term Storage
• Keep unpainted surfaces rust free
with products such as Boeshield
® T-9.
Loose hair and clothing
could get caught in
machinery and cause
serious personal injury.
Keep loose clothing
rolled up and long hair
tied up and away from
machinery.
Projectiles from the
machine could cause
serious eye injury.
Wear safety glasses at
all times.
Schedule Maintenance Safety
SECTION 7: MAINTENANCE