Refitting the coffeee brewer – Geneva Lab FRESH BREW 3206 User Manual
Page 23
G E N E V A
-
H O T B E V E R A G E M E R C H A N D I S E R • 3 2 0 5 • 3 2 0 6 • 4 2 1 4 8 0 3
21
REFITTING THE COFFEEE BREWER
•
Open the door of the machine and switch machine off using the main switch.
•
Fit the Steam Extractor Hood (Fig 13h) back onto the brewer chamber, and refit the unit to the
machine.
•
Re-attach the sealing rod (Fig 13f).
•
Refit the carriage assembly (Fig 13e).
•
Use the locking catches (Fig’s 13c & 13d) to lock the carriage in place
•
Refit the splashguard (Fig 13b).
•
Refit the outlet elbow (Fig 13a).
•
Re-align the ingredient chutes into the brewer chamber.
•
Ensure that hands and loose clothing are clear of the brewer(s).
•
Switch machine back ON.
•
Close and lock the machine.
•
Once machine has reset, make a test of at least one coffee.