Grandstream Networks GXP14XX - Manual (Page 22)

GRANDSTREAM GXP21XX/GXV3140/GXV3175 SERIES PHONES 20-BD5320-00
© 2011 GRANDSTREAM PAGE 22 OF 45
BroadWorks Device Management Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
File Inspection Inspect System Config File NA Config files cannot be
retrieved from phone.
Inspect Device-Specific
Config File NA
Inspect Other Config Files NA
Inspect Static Files NA
Device Inspection Inspect SIP Settings Yes
Inspect Line Settings Yes
Inspect Service Settings Yes
HTTP File Upload HTTP Upload Using XSP IP
Address No
HTTP Upload Using XSP
FQDN No
HTTP Upload Using XSP
Cluster FQDN No
Call Processing
Sanity Tests Register with Authentication Yes
Call Origination Yes
Call Termination Yes
Remote Restart Yes
Shared Line Origination Yes GXP Models only
Shared Line Termination Yes GXP Models only
Shared Line Status Yes GXP Models only
Busy Lamp Field Yes GXP Models only
5.2 Device Management Configuration
This section identifies the steps required to enable the Grandstream
GXP21xx/GXP14xx/GXV31xx for device management. For Device Management
configuration details not covered here, refer to the BroadWorks Device Management
Configuration Guide
[2] .
5.2.1 Configure BroadWorks Tags
The Grandstream GXP21xx/GXP14xx/GXV31xx makes use of dynamic tags which may
be configured by a BroadWorks administrator as either system default or device type
specific tags. This section identifies the required tags.