Grandstream Networks HANDYTONE 486 - Manual (Page 18)

HandyTone-486 User Manual Grandstream Networks, Inc.
18
Cloned WAN MAC
Address: Allow the user to set a specific MAC address. Set in Hex format
LAN Subnet Mask
Sets the LAN subnet mask. Default value is 255.255.255.0
LAN DHCP Base IP:
Base IP for the LAN port, which function as a Gateway for the subnet.
Default value is 192.168.2.1
DHCP IP Lease Time:
Value is set in units of hours. Default value is 120hr (5 Days.) The time IP
address are assigned to the LAN clients
DMZ IP:
Forward all WAN IP traffic to a specific IP address if no matching port is
used by HandyTone-486 itself or in the defined port forwarding.
Port Forwarding: Allow the user to forward a matching (TCP/UDP) port to a specific LAN IP
address with a specific (TCP/UDP) port.
6.2.3 Advanced User Configuration
To login to the Advanced User Configuration page, follow the instruction in section 6.2.1 to get to the
following login page. The password is case sensitive and the factory default password for Advanced
User is ‘admin’.
Advanced User configuration page includes not only the end user configuration, but also some
advanced configuration such as SIP configuration, Codec selection, NAT Traversal Setting and other
miscellaneous configurations. Following is the snap shot of the configuration page.