Grandstream Networks HANDYTONE 486 - Manual (Page 14)

HandyTone-486 User Manual Grandstream Networks, Inc.
14
NOTE:
• If typing IP address into address of browser to get into the configuration page, please strip out
the “0” announced in IVR or displayed in the phone if using BT or GXP phones as the browser
will parse in octet. e.g.: If IVR announce the IP address: 192.168.001.014, please just key in IP
address into the address field by: 192.168.1.14. Otherwise if you key in 192.168.001.014 into
browser you are actually try to talk to: 192.168.1.12 since the browser parse it in octet.
6.2.2 End User Configuration
Once this request is entered and sent from a Web browser, the HandyTone-486 will respond with the
following login screen:
The password is case sensitive with maximum length of 25 characters. The factory default password
for End User is “123” or just blank; for Administrator is “admin”. Only administrator can get access to
“ADVANCED SETTING” configuration page.
After the correct password is entered in the login screen, the embedded Web server inside the
HandyTone-486 will respond with the Configuration Menu page screen which is explained in details
below.
Following are configuration pages End User will see once log in correctly:
• Basic Settings Page:
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
End User
Password:
(purposely not displayed for security protection)
IP Address:
dynamically assigned via DHCP (default) or PPPoE
(will attempt PPPoE if DHCP fails and following is non-blank)
PPPoE account ID: