Grandstream Networks HANDYTONE 486 - Manual (Page 16)

HandyTone-486 User Manual Grandstream Networks, Inc.
16
• Status Page:
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
MAC Address: 00.0B.82.01.FC.52
WAN IP Address: 192.168.1.10
Product Model: HT487
Software Version: Program-- 1.0.6.2 Bootloader-- 1.0.1.0 HTML-- 1.0.0.48 VOC-- 1.0.0.9
System Up Time: 7 day(s) 2 hour(s) 40 minute(s)
Registered: Yes
PPPoE Link Up: disabled
NAT: detected NAT type is open Internet
NAT Mapped IP: 0.0.0.0
NAT Mapped Port: 0
Total Inbound Calls: 0
Total Outbound Calls: 0
Total Missed Calls: 0
Total Call Time (in minutes): 0
Total SIP Message Sent: 30801
Total SIP Message Received: 31039
Total RTP Packet Sent: 0
Total RTP Packet Received: 0
Total RTP Packet Loss: 0
All Rights Reserved Grandstream Networks, Inc. 2005
Here are explanations of the above two pages:
MAC Address The device ID, in HEX format. This is very important ID for ISP
troubleshooting.
WAN IP Address This field shows WAN port IP address.
Product Model This field contains the product model info, like HT487 is HT486 Rev:2.0
Software Version Program: This is the main software release. This number is always used for
firmware upgrade. Here the box showed: 1.0.6.0
Bootloader: This is normally not changed.
HTML: This is the user interface, normally not changed.
VOC: This is the codec program, normally not changed.