GE GCG1540 - Manual (Page 16)

16
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
Installation Instructions.
Dimensions for trimless panel with handle
Use these dimension drawings to create a
custom panel for use without a trim kit.
The panel should be 1/2
″ to 5/8″ (13 mm
to 16 mm) thick.
NOTE: A thicker panel may need rounded front
corners and cut-out for access to the handle.
Installation:
1. Remove foot pedal, toe guard and
decorative panel.
2. Align the top of the custom panel with the
bottom of the handle.
3. Secure the panel from the back using four
#8 x 1
″ wood screws.
4. Reinstall the toe guard using the existing
screws and 1/2
″ washer. Then reinstall the
foot pedal.
Trimless Panel with Handle
23 13 ⁄ 16
″