GE GCG1540 - Manual (Page 15)

15
Consumer Support
Tr
oubleshooting T
ips
Operating Instructions
Safety Instructions
Installation Instructions
To order a color-matched trim kit for the
installation of a custom-made panel, contact
your local authorized GE dealer.
To locate an authorized GE dealer in
your area, call the GE Answer Center
at 800-626-2000.
Available kits for custom-made panels are:
GPF82B (Black)
GPF82C (Bisque)
GPF82W (White)
GPF82S (Stainless Steel)
Custom-made panel dimensions
Flat panel: A 7/32 ″ (5.6 mm) thick panel is
required. This is the same thickness as a
standard 1/4
″ plywood or paneling.
Raised panel: The outer section of the panel
must be 7/32
″ (5.6 mm) thick to fit into trim.
Raised panel dimensions as shown above.
Installing a Custom Panel
23 15 ⁄
16
″
(60.5 cm)
23 15 ⁄ 16
″
(60.5 cm)
1 1 ⁄
4
″
(32 mm)
14 5 ⁄ 8
″
(37.2 cm)
14 5 ⁄
8
″
(37.2 cm)
7 ⁄ 32
″
(5.6 mm)
Raised
panel or
decorative
trim
Outer
section of
panel
3 ⁄
16
″
(8 mm)
3 ⁄
16
″
(8 mm)
both sides
Custom Panel Options
Three options are available for customizing you compactor:
• Color-matched trim kit with Handle (maximum thickness of 7/32
″ at edges)
• Trimless panel with Compactor Handle (1/2
″ minimum to 5/8″ maximum thickness)
• Trimless panel without Compactor Handle (1/2 ″ minimum, use cabinet custom handle or
foot pedal)