Global Machinery Company 50L - Manual (Page 3)

3
��������
Air discharged from
this unit is not
suitable for human
consumption.
��������
Test the safety relief
valve daily.
Refer the instruction
manual.
When filter becomes
dirty or oily, clean or
replace filter. Refer to
instruction manual.
���������������� �������
High voltage used on
this equipment. Prior to
servicing or removing the
cover, switch off the
power supply & remove
plug from mains. Ensure
mains outlet is adequately
rated for this unit.
���������
Read instruction manual
prior to starting unit.
This equipment
operates from
AC mains only.
���������
Check the oil level before starting the
compressor every time.
Make sure the compressor is on a level
surface prior to checking the oil level.
The oil level is required to be at the
red dot on the oil level sight glass
prior to use.
Use only oil grade specified in the
instruction manual.
����������
To prevent build-up of
condensation, open
drain cock daily.
��������
• Do not switch on without
first checking the oil level
and, if required, filling
with oil.
• Always turn the compressor
off at the On/Off switch on
the compressor before
turning off at the power
supply.
Unit starts
automatically.
Switch off power supply,
remove plug & relieve
air pressure prior
to commencing
service tasks.
��������
Warning labels explained
On the tank of your air compressor you will notice various
warnings about the operation of the compressor. These
warnings and the procedures associated with them are
explained fully in this manual on the following pages.
Please take note of these. They are important for your
safety and that of others in the vicinity.