Angle guide – Grizzly T10010 User Manual

Page 15

Model T10010 Wet Grinder

-15

Here are some tips for using your wet
grinder water reservoir:

• Check the water level before every use

and be sure the wheel is wet before

you begin grinding. DO NOT use the

grinder without water.

• Leaving the grinding wheel stored in

water will cause damage to the wheel

and create potential hazards because

the wheel will become unbalanced.

Once any grinding process is complete,

return the reservoir to the storage posi-

tion to prevent prolonged water expo-

sure to the wheel.

• Empty, rinse, and refill the reservoir

regularly. This prevents metal and

stone from accumulating in the reser-

voir.

• Place a magnet in the reservoir to

catch and collect metal filings. This will

help prevent excessive metal accumu-

lation on the grinding wheel.

Angle Guide

The Model T10010 Wet Grinder comes

with an angle guide to help identify and

maintain the cutting angle on a variety of

tools.

Find the angle notch that best fits the

tool you wish to grind by placing the

sharpened edge of the workpiece into

each notch.

Place the angle guide on the wheel

with the desired angle notch (found in
Step 2

) against the wheel and adjacent

to the universal support (Figure 12).

Figure 11.

Measuring notches.

Figure 12.

Angle guide usage.

Desired

Angle Notch

Angle Edge

Correct

Grinding Angle

DO NOT allow the grinding wheel
to stay immersed in water for long
periods of time without running. The
water can cause the wheel to become
waterlogged and unbalanced and
may cause sections of the wheel to
break off when the grinder is started.
Always empty or lower the reservoir
to the storage position when the
grinder will not be used.

To use the angle guide:

Locate the eight measuring notches on

the angle finder (Figure 11).

Adjust the positioning of the tool and

the universal support height as neces-

sary so that the sharpened edge of

the tool is flat against both the grind-

ing wheel and the angle edge on the

angle guide as shown in Figure 12. For

precision grinding attachments, see
Accessories

on Page 17.

Desired

Angle Notch

Measuring

Notches

Workpiece

Angle Edge

Workpiece