Garmin GPSMAP 4000 - Manual (Page 29)

GPSMAP 4000 Series Owner’s Manual 2
W
here
t
o
?
W
here
t
o
?
6. Select Done to finish the route or Cancel Route to delete the route.
To create a route in another location:
1. From the Home screen, select Information > User Data > Routes > New Route .
2. By pressing the ROCKER , use the map pointer ( ) to select the initial location you want to start
the new route.
3. Select Add Turn to mark the starting point of the route.
4. Choose the location of the first turn and select Add Turn . Repeat until the route is complete.
5. Select Done when the route is complete.
To create a route using Auto Guidance:
1. From the Navigation chart, select your destination.
2. Select
Navigate To > Guide To . Your route is calculated.
NOTE: You can change the auto guidance path to a route by selecting the end of the path and selecting
Navigate To > Route To . The auto guidance path stays on the screen, allowing you to trace it while
creating a route.
To edit a route
1. From the Home screen, select Information > User Data > Routes .
2. Select the route to edit.
3. Select
Edit Route . You can edit the route name, turns, or delete the route.
To bypass a waypoint on a route:
1. Create a route as previously described.
2. Select the waypoint that follows the waypoint you are bypassing.
3. Select
Navigate To > Go To (or Route To ).