GIGABYTE AirCruiser MIMO GN-BR03GM - Manual (Page 19)

GN-BR03GM AirCruiser MIMO Router
15
IP/MAC assignment and Time To Lease.
IP Address DHCP
assigned IP address on
WLAN
MAC Address MAC
address of the device with the
assigned IP
TTL The time to live (TTL) in
seconds that a resolver will
use data received from a
nameserver before it will ask
for the same data again.
Routing Table Tab
To determine the best path to a distant network, the BR03GM uses RIP to
always select the path that has the least number of hops. Each router that data
must traverse is considered to be one hop. The routing table in a router using
RIP contains an entry for every known destination network. The Routing Table
displays the GN-BR03GM RIP routing details.
Destination The IP address of
the destination network address
Netmask The subnet of that
destination IP address
Gateway Gateway of the
destination IP address
Metric Hop count to the
destination network
Interface Type of interface
used
UPnP Port Mapping Table
The UPnP specification is based on TCP/IP and Internet protocols that let
devices communicate with each other - UPnP technology doesn't rely on
specific device drivers, using instead these standard protocols. UPnP devices
can automatically configure network addressing, announce their presence on a
network subnet, and permit the exchange of device and service descriptions.
The UPnP Port Mapping Table displays the GN-BR03GM port mapping and
UPnP packet request details.
No. The event number
Figure 12: DHCP Lease Table
Figure 13: Routing Table