GIGABYTE AirCruiser MIMO GN-BR03GM - Manual (Page 12)

GN-BR03GM AirCruiser MIMO Router
8
Ethernet port of your computer. (It does not matter which LAN port you
select).
Step 4
Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
Step 5
Turn on your ADSL/Cable modem. After verifying all the connections,
proceed to Chapter 5 Connecting the Router to the Internet.
Using a Wireless Connection
Step 1 Turn off all the hardware devices in your network, including the
ADSL/Cable modem by unplugging their power supply.
Step 2
Connect the Ethernet cable of your ADSL/Cable modem to the WAN
port of the GN-BR03GM.
Step 3
Plug the power adapter cord into the router’s power jack and then
plug the power adapter into a power outlet.
Step 4
Turn on your ADSL/Cable modem.
Step 5
Insert you PCMCIA notebook card, or wireless USB adapter into
your notebook PC.
Step 6
If using a GIGABYTE PCMCIA notebook card, SmartSetup 3 will
automatically detect your BR03GM and walk you through the setup
procedure (for more details refer to your SmartSetup 3 Guide).
Please refer to your vendor’s users manual for connecting to the
wireless network.
Step 7
When scanning for available wireless networks, your BR03GM’s
factory default SSID name is GIGABYTE. Select it using the
procedures described in your particular vendor’s notebook adapter
users manual.
Step 8
After verifying all the connections, proceed to Chapter 5
Connecting the Router to the Internet.