Grizzly Model G8027 - Manual (Page 22)

-20- G8027 1 HP Dust Collector
Since all bearings are shielded and permanently
lubricated, simply leave them alone until they
need to be replaced. DO NOT lubricate them.
Regular periodic maintenance on your Model
G8027 Dust Collector will ensure its optimum
performance. Make a habit of inspecting your
machine each time you use it. Check for the
following conditions and repair or replace when
necessary:
1. Loose mounting bolts.
2. Worn switch.
3. Worn or damaged cords and plugs.
4. Any other condition that could hamper the
safe operation of this machine.
5. DO NOT let collection bags get completely
full.
Keep loose clothing
rolled up and out of the
way of machinery and
keep hair pulled back.
Lubrication
Schedule
SECTION 6: MAINTENANCE
Disconnect power to the
machine when perform-
ing any maintenance,
assembly or adjust-
ments. Failure to do this
may result in serious
personal injury.
!
Wear safety glasses dur-
ing the entire operations
process. Failure to com-
ply may result in serious
personal injury.