Grizzly G1030Z2 - Manual (Page 19)

Model G0562Z/ZP, G1030Z2/Z2P (Mfg. 11/11+)
-17-
g1030z2/g1030z2p only:
a. hook the top loop of the upper filter
bags (fabric) over the upper bag sup-
ports, as shown in
figure 22.
figure 22. attaching upper filter bag.
b. tighten the upper bags to the col-
lector using the strap and clamp kits
shown in
figure 23.
note: DO NOT force the clamp. If it
will not close, choose the next notch
over, then clamp in place.
figure 23. upper collection bag secured.
Clamp
figure 24. lower collection bag installed.
14. hook the clear collection bag on the hooks
around the bottom of the collector to hold the
bag in place for the next step.
15. tighten the belt clamp around the narrow
foam strip to seal and secure the lower col-
lection bag (
figure 24).
note: DO NOT force the clamp. If it will
not close, choose the next notch over, then
clamp in place.
16. insert the inlet over the impeller intake hole.
17. secure the inlet in place with the phillips
head tap screw ( figure 25).
figure 25. installed inlet.