Grundig XENTIA LXW 94-8625 - Manual (Page 12)

Connection to
External equipment
12
Connect the signal cable from the monitor output socket
of the PERSONAL COMPUTER to the
RGB INPUT sock-
et of the set.
Connect the audio cable from the PC to the AUDIO
INPUT sockets of the set.
Press the INPUT SELECT button to select PC-RGB .
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
RGB input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,
720p-60Hz, 1080i-50Hz, 1080i-60Hz.
Connecting PC
RGB INPUT AUDIO INPUT HDMI INPUT AUDIO INPUT AUDIO INPUT
AUDIO AUDIO R L
RGB OUTPUT RGB OUTPUT (R) (R) AUDIO (L) AUDIO (L)
7 7
< Back panel of the set >
- Send the set’s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical)
Caution : Do not look into the optical output port. Looking
at the laser beam may damage your vision.
How to connect
Connect one end of an optical cable to the TV Digital
Audio (Optical) Output port.
Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
Note : Digital Audio Output works, when it’s inputted
HDMI signal to the set.
Connecting Digital Audio
SERVICE OPTICAL S-VIDEO ANT. IN . IN AC INPUT AC INPUT
AV2
VIDEO AUDIO L R
8 8
< Back panel of the set >