Grizzly Hanging 3 Speed Air Filter G0738 User Manual

Page 17

model g0738 (mfg. since 1/12)

-15-

Note: Some positions for the ceiling hooks
may be slightly uneven from each another.
To make up for this, minor adjustments can
be made to the length of the hanging assem-
bly by adjusting the amount that the machine
hook is threaded into the air filter housing
(see

Figure 10). If you do this, tighten the

hex nut to secure the hook.

Figure 10. machine hook partially threaded to

adjust the hanging length.

hex nut

2. drill a

⁄

" pilot hole into the center of the

joists at the mounting locations, then fully
thread the ceiling hooks into the joists (see

Figure 11).

Important: If the joists are covered with sheet
rock or paneling, use a stud finder or other
device to locate the center of the joists.

Joist

Ceiling

Hook

Machine

Hook

Figure 11. Air filter mounted to the joists.

3. Attach the provided chains to the ceiling

hooks.

4. With the help of another person to hold the air

filter up, attach the other end of the chains to
the machine hooks.

THIS AIR FILTER IS TO BE USED FOR

WOOD DUST ONLY. Do not use it to filter

toxic fumes, paint spray, or dissipate smoke

or fumes, which could damage the filters.