Gateway E-1200 - Manual (Page 27)

18 E-1200 User’s Guide
1. Save and close any open files to prevent data loss in the event of a
power failure.
2. Click Start , and then click Suspend on the Start menu.
3. The power LED turns amber and the monitor becomes dark,
indicating that the computer has entered Suspend mode.
1. Press any key on the keyboard or move the mouse.
2. The power LED turns green, and your computer returns to the state it
was in before it entered Suspend. However, if your system is part of a
Novell network, putting your computer in Suspend disconnects you
from your network connection. To reestablish your network
connection:
A. Click Start and then click Shut Down .
B. From the Shutdown Windows options, select Close all programs and log
on as a different use r . Selecting that option bypasses the restart
process and displays your network logon dialog box.
C. Enter your password and click OK . Your logon script runs and your
network connections are reestablished.
To put your system into Suspend
To take your system out of Suspend
Important!
If you have a Novell
network and you put your
system in Suspend mode, it
will disconnect from the
network.