Grizzly G1033 - Manual (Page 13)

G1033 20" Planer -11-
Figure 6. Knife setting jig.
The knife setting jig has been provided to make
knife setting quick and easy.
See Figure 6 .
To assemble the knife setting jig:
1. Snap one of the E-clips over the notch on
one end of the knife setting rod.
2 . Slide the cast aluminum knife setting jig
brackets onto the rod.
3. Snap the other E-clip onto the notch at the
other end of the knife setting jig rod.
E-clip
Jig Rod
Jig Bracket
Knife Setting Jig
Planer knives are dangerously sharp. Use
extreme caution when working near cutting
surfaces. Failure to exercise care while
working near knives could result in severe
injury.
NOTES