GIGABYTE GA-8I865GME-775-RH - Manual (Page 21)

Hardware Installation - 21 -
English
6) FDD (FDD Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to
the FDD drive. The types of FDD drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB and
2.88 MB. Before attaching the FDD cable, please take note of the foolproof groove in the FDD
connector.
7) SATA0/SATA1 (Serial ATA Connector,)
Serial ATA can provide up to 150 MB/s transfer rate. Please refer to the BIOS setting for the Serial
ATA and install the proper driver in order to work properly.
Pin No. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND
7 1
1
34 2
33
SATA1
7 1
SATA0