Grizzly G8030 - Manual (Page 19)

-17- G8030 3 H.P. Overarm Router
Spindle Lowering
Speed
The Model G8030 Overarm Router uses an air
valve to control the speed with which the spindle
is lowered.
1. Increase or decrease lowering speed, as
desired, by turning the knurled knob as shown
in
Figure 13.
2. We suggest you try different settings until you
find the most useful speed to use. Hardwoods
will require a slower setting than softwoods.
Figure 15. Spindle adjustment.
The table on the Model G8030 adjusts from a 0°
to 45° angle of tilt. The right side trunnion is
marked in degrees, and both trunnions have lock-
ing handles to secure the table in the exact posi-
tion needed.
1. Loosen the table lock handles as shown in
Figure 16.
Table Tilt
Adjustment
Figure 16. Table tilt adjustment scale
and handle.
2. Tilt the table until it reaches the required angle.
3. Tighten the right and left locking handles
securely.
Table Tilt
Scale