Additional safety for buffers – Grizzly H4380 User Manual
Page 8

-6-
Model h4380 (Mfg. since 7/02)
additional Safety for Buffers
1. aLWayS Wear eye prOtectIOn!
2. Wear an apprOveD DuSt MaSK
Or reSpIratOr. Buffing operations
produce dust.
3. MaKe Sure Buffer IS SecureD
fIrMLy tO a BencH Or StanD
BefOre uSe. Any “wobbles” must be
corrected by shimming or blocking before
operation.
4. DO nOt uSe grInDIng WHeeLS On
tHIS MacHIne. it is strictly designed for
buffing and drum sanding only.
5. DO nOt stand directly in front of buff-
ing or sanding accessories when turning
machine on.
6. perfOrM machine inspections and
maintenance service promptly when
called for.
7. DO nOt allow your hands to come into
contact with buffing wheels during opera-
tion. Abrasive accessories have the abil-
ity to remove a lot of material, including
skin, very quickly.
8. any prOBLeM concerned with any
moving parts or accessories must be
investigated and corrected with the power
disconnected, and after everything has
come to a complete stop.
9. never leave the machine running unat-
tended.
10. never Buff By pLacIng tHe
WOrKpIece On tOp Of tHe Buff-
Ing WHeeL. the wheel may kick the
workpiece toward the operator. Always
buff on the downward part of the buffing
wheel.
11. HOLD tHe WOrKpIece fIrMLy
WHILe BuffIng.
no list of safety guidelines can be com-
plete. every shop environment is different.
always consider safety first, as it applies
to your individual working conditions. use
this and other machinery with caution and
respect. failure to do so could result in seri-
ous personal injury, damage to equipment,
or poor work results.
Like all machinery there is potential danger
when operating this machine. accidents are
frequently caused by lack of familiarity or
failure to pay attention. use this machine
with respect and caution to decrease the
risk of operator injury. If normal safety pre-
cautions are overlooked or ignored, serious
personal injury may occur.