Blade selection, Blade speed, Notice – Grizzly G0592 User Manual

Page 25

G0592 Metal Cutting Bandsaw

-23-

Blade Selection

The Model G0592 uses 132" x 1" bandsaw
blades.

Selecting the right blade for the job depends on
a variety of factors, such as the type of material
being cut, hardness of the material, material shape
machine capability, and operator technique.

We suggest you do some research for your spe-
cific situation so you get the best blade to match
your needs.

Grizzly offers a variety of selections that can be
found in the current catalog and in

SECTION 5:

ACCESSORIES on Page 28.

The chart shown in

Figure 21 is a reproduction of

the chart you will find on the blade cover of your
G0592. Use it as a rough guideline.

��

�

� �

�

��

Blade Speed

To change blade speeds:

1. Turn the bandsaw ON and allow it to come

up to speed.

2. Turn the speed adjustment knob (Figure

23), clockwise to decrease blade speed and
counterclockwise to increase blade speed.

NOTICE

Only change speeds while the motor is run-

ning. Changing speeds when machine is

OFF may result in damage to your machine.

Always make sure belt guard is in use.

The Model G0592 has a variable speed control
ranging from 98 to 394 feet per minute (FPM).

Material Width/Diameter

Material Shapes

Teeth Per Inch (TPI)

Figure 21. G0592 Blade selection and speed chart.