Grizzly G0592 - Manual (Page 22)

-20-
G0592 Metal Cutting Bandsaw
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
This bandsaw is for trained operators only.
WE STRONGLY RECOMMEND that you read
books, trade magazines, and get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.
The vise on the Model G0592 can be positioned
for cutting on both sides of the vise. It also has a
ratcheting type leadscrew that allows for fast jaw
adjustments.
To change vise positions:
1. Remove the chip trays and the splash
guard.
2. Raise the bow to the maximum height and
lock in place.
3. Loosen the two vise locks at the base of the
vise and remove the upper chip tray (see
Figure 15).
Vise
Half Open
Figure 15. Changing vise positions.
Vise Locks