Grizzly G4008 - Manual (Page 16)

-14- G4008/G4009 Drill Press
Table Adjustments
1. To adjust the table up or down, loosen the col-
umn lock handle and turn the crank handle to
the desired height. Tighten the column lock
handle.
Figure 15.
2. To swing the table, loosen the column lock
handle and swing the table to the desired
position. Tighten the column lock handle. For
long workpieces, swing the work table away
180° and use the base as your table.
3. To rotate the table, loosen the table lock han-
dle, rotate the table to the desired position
and tighten the table lock handle.
Figure 16.
Figure 15.
Lock Handle
Lock Handle
Figure 17.
Figure 16.
4. To tilt the table, loosen the pivot bolt with the
12mm Allen wrench supplied.
Figure 17. Tilt
the table to the desired angle (up to 45°).
Tighten the pivot bolt.
Pivot Bolt