GE VERTICAL DRILLING MOTOR GE752 - Manual (Page 60)

GEK–91584D, Vertical Drilling Motor, Type GE752
60
FIG. 36. DRIVE–END BEARING ASSEMBLY (41B537821, CHG. B). E–37952B
13
12
17
2
4,5
20
3
6
14 ASSEMBLED TO EITHER P13
OR P17, DEPENDING ON MODEL.
NOT INCLUDED ON ALL MODELS
NOT INCLUDED ON ALL MODELS
APPLY P15 TO THREADS
AT BOTH ENDS OF P12
USE IF NECESSARY TO
ADJUST FOR PROPER
ASSEMBLY OF PARTS
17, 18 AND 19
TORQUE TO
110–120 FT. LBS.
22 FILL BEARING COMPLETELY
WITH 29 OZ. OF P7
24
NOT INCLUDED ON
ALL MODELS
SMEAR .5 OZ. OF
P7 ON SEALS
USE 4.8 OZ. OF
P7 IN EACH CAVITY
23
2
18
19
16,21
REF. DESCRIPTION
1 FRAME HEAD
2 GASKET
3 BEARING CAP
4 LOCKWASHER 5/8 N405P47P
5 BOLT 5/8–11 X 3 1/2 N22P33056
6 SLEEVE
7 GREASE
12 PIPE 1/4 X 6 IN.
13 COUPLING 1/4 NPT
14 PIPE PLUG 1/4 N5700P31
REF. DESCRIPTION
15 LOCK–TITE 497A806P36
16 FRAME HEAD
17 FITTING 90 ELBOW
18 FITTING 90 ELBOW
19 FITTING BULKHEAD
20 WASHER 9/16 N402P46B13
21 FRAME HEAD
22 ROLLER BEARING
23 BEARING CAP
24 FLINGER
MODELS
SEE TABLE 2, PAGE 20