Loading the envelope feeder – GPX X642 User Manual
Page 90
90
Loading the envelope feeder
The optional envelope feeder can accept a variety of envelope sizes. However, the envelope feeder
must be adjusted correctly to ensure trouble-free printing. To load the envelope feeder:
1
Adjust the envelope support for the length of envelope you are loading.
•
Fully closed (pushed in toward the MFP) for short envelopes
•
Extended to the middle position for medium-length envelopes
•
Fully open (extended to its full length) for long envelopes
Warning:
Do not place objects on the envelope feeder. Avoid pressing down on it or applying
excessive force.
2
Lift the envelope weight back toward the MFP. It stays in place.
3
Slide the width guide to the far right.