Unacceptable paper for the adf – GPX X642 User Manual
Page 102
102
•
Some chemically treated papers used to make copies without carbon paper, also known as
carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper (see
the Card Stock & Label Guide located on the Lexmark Web site at
for
supported chemically treated papers)
•
Preprinted papers with chemicals that may contaminate the MFP
•
Preprinted papers that can be affected by the temperature in the MFP fuser
•
Preprinted papers that require a registration (the precise print location on the page) greater
than ±0.09 in., such as optical character recognition (OCR) forms
In some cases, you can adjust registration with your software application to successfully print
on these forms.
•
Coated papers (erasable bond), synthetic papers, thermal papers
•
Rough-edged, rough or heavily textured surface papers or curled papers
•
Recycled papers containing more than 25% post-consumer waste that do not meet
DIN 19 309
•
Recycled paper having a weight less than 60 g/m
2
(16 lb)
•
Multiple-part forms or documents
Unacceptable paper for the ADF
Your automatic document feeder is designed to handle most paper types. However, if you are unsure
if your document will cause a jam in the document feeder, we recommend that you scan it using the
scanner glass (flatbed).
The following cannot be properly fed by the automatic document feeder:
•
Paper with clip or staple
•
Paper with ink that is not dry
•
Paper with inconsistent thickness, such as envelopes
•
Paper with wrinkles, curls, folds, or tears
•
Tracing paper, heavyweight matte paper, or carbonless paper
•
Paper that is too large or too small
•
Items other than papers, such as cloth, metal, or OHP film
•
Notched paper
•
Paper with an odd (non-rectangular) shape
•
Photographic paper
•
Paper with perforations on its side
•
Very thin paper