Genicom 3850 - Manual (Page 72)

68
ETX/ACK Protocol
When set to Y, the EXT/ACK protocol is enabled. This protocol is used to verify the receipt
of blocks of data sent from the host to the computer.
SER: ETX/ACK ENTER
SER:EXT/ACK>N ↓
SER:EXT/ACK:Y ↓
Robust Xon
Y : When enabled, the printer will output DC1 when buffer is empty and printer is on line.
N : Disables this function.
SER: ROBUST XON ENTER
SER:ROBST XON>Y ↓
SER:ROBST XON:N ↓
XON/XOFF Status
BUFF: Reflects buffer status only.
FAULT: Reflects fault status only.
ON/BU : Reflects online and buffer status.
FA/BU : Reflects fault and buffer status.
NONE : Never output or never change from static state
ONLN : Reflects online status only.
SER: XON/XOF STAT ENTER
SER:XONXOF>BUFF ↓
SER:XONXOF:FAULT ↓
SER:XONXOF:ON/BU ↓
SER:XONXOF:FA/BU ↓
SER:XONXOF: NONE ↓
SER:XONXOF: ONLN ↓