GE 29299 - Manual (Page 19)

19
3. Press the DIAL button and the display
shows PICKUP PHONE. A 10 second
timer will also start at this point on the
upper right side of the display, letting
you know the time until the unit will
return to the Caller ID record.
• If you adjust the number to be dialed, the
timer will reset after each adjustment.
4. Pick up the handset before the timer
reaches 0. NOW DIALING shows in the
display and the number is dialed.
I
F YOU DID NOT PROGRAM YOUR LOCAL
AREA CODE IN THE SETUP MENU
1. Use the REVIEW up and down buttons to
display the number you want to dial. You
will only see 10-digit numbers (i.e. 234-
555-1234).
2. See steps 2 through 4 in the above
section to complete the dialback
sequence.
NOTE: If only PICKUP PHONE shows on
the display, no other changes to the number
can be made. The information sent from
the telephone company is known to be a
valid number for dialing back (utilized only
in very limited areas). Once you pick up the
phone, the number will be automatically
dialed.
10/19 12:30
1 - 315 - 555 - 1324
SMITH JOHN
1 ABC 2 DEF 3
GHI 4 JKL 5 MNO 6
PQRS 7 TUV 8
WXYZ
9
* OPER
0 #
VOLUME
REDIAL
STORE
REVIEW DELETE
DIAL
OPTIONS A B
FLASH HOLD
10/19 12:30
315 - 555 - 1324
SMITH JOHN
REVIEW
buttons DIAL buttons