Stovax 5 - Manual (Page 6)

6
6.1 Place the flame baffle onto the burner and push against the
rear tray lip. See diagram 3.
6.2 Locate the rear panel against the spacer brackets and slide
down so that it locates on the ledge of the flame baffle. See
diagram 4.
6.3 Locate the front coal between the heat shield and the flame
baffle so that its ends sit flat against the burner skin. See
diagram 5.
6.4 Place five of the loose round coals on the front coal so they
lean against the flame baffle, in between the fingers. Place
the two rectangular coals against the reflector panels, one
either side, behind the front row of loose coals. See
diagram 6.
6.5 Place four of the loose round coals behind the first row so
that they sit on the fingers, the two outer ones should touch
the rectangular coals. See diagram 7.
6.6 Place the remaining three round coals behind the centre
row so that they touch the back panel. See diagram 8.
USER INSTRUCTIONS
6. FUEL BED ARRANGEMENT
AR0364
AR0361
AR0363
AR0362
AR0360
AR0359
3
4
5
6
7
8