Stovax 5 - Manual (Page 20)

20
10.1 Remove the cover plate from the bottom of the stove by
undoing the 6mm bolt. See diagram 18.
10.2 Undo the M5 nyloc nut from the bottom of the burner unit
and remove the aeration plate. See diagram 19.
10.3 Reassemble in reverse order with the correct aeration plate.
In order to change between gas types, it will be necessary
to change the following items.
• Pilot Unit
• Control Valve**
• Main Injector
• Aeration Plate
• Data badge
The relevant parts can be ordered from Gazco, always
quote the appliance type and serial number when ordering
spare parts.
** NOTE: THE CONTROL VALVE IS FACTORY PRESET
FOR CORRECT GAS TYPE AND MODEL, A NEW UNIT
WILL NEED TO BE ORDERED WHEN CHANGING
BETWEEN GAS TYPES.
11. CHANGING BETWEEN GAS TYPES
AR1441
SERVICING INSTRUCTIONS
REPLACING PARTS
AR1449
10. PRIMARY AERATION PLATE
18
19