GE GXRM10RBL - Manual (Page 4)

Installation
Reverse Osmosis Filtration System
Instructions
Model GXRM10RBL
Questions? Call 800.GE.CARES (800.432.2737) or Visit our Website at: GEAppliances.com
BEFORE YOU BEGIN
Read these instructions completely
and carefully.
• IMPORTANT
— Save these instructions
for local inspector’s use.
• IMPORTANT
— Observe all governing
codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these instructions
for future reference.
• Proper installation is the responsibility
of the installer.
• Product failure due to improper installation
is not covered under the Warranty.
• A shut-off valve must be available or added
near the installation point.
TOOLS AND MATERIALS REQUIRED
FOR INSTALLATION
• Drill with 1-1/2” Drill Bit (type as required)
if mounting hole is needed for faucet
• Adjustable Open-End Wrenches
• Phillips and Flat-Blade Screwdrivers
• Utility Knife
CONTENTS INCLUDED
WITH PRODUCT
• Reverse Osmosis Assembly and Tubing
• Product Literature (Owner’s Manual and
Installation) and Performance Data Sheet
• Water Supply Inlet Parts Bag
• Drain Line Adapter
• Storage Tank
• Faucet
• Pipe Thread Tape
4