Grizzly G0458 - Manual (Page 16)

-14-
Model G0458 (Mfg. Since 5/11)
3. mount a top and bottom short bracket to the
left and right sides of the stand leg assembly
completed in
step 2 as shown in figure 8.
Secure with two m8-1.25 x 15 carriage bolts
and serrated flange nuts.
2. Secure a second leg to the top and bottom
long brackets with two m8-1.25 x 15 carriage
bolts and serrated flange nuts as shown in
figure 7.
We recommend assembling the stand upside
down. to make it easier, have an assistant hold
the pieces while you assemble the stand.
assembly
to assemble the machine:
1. mount a top and bottom long bracket to a
stand leg and loosely secure with two m8-1.25
x 15 carriage bolts and serrated flange nuts
as shown in
figure 6.
do not final tighten stand bolts until the
stand components have been assembled.
figure 6. top and bottom long brackets secured
to a stand leg.
top long bracket
leg
x2
Bottom long
Bracket
figure 8. top and bottom short brackets
secured to a stand leg assembly.
x2
Bottom
Short
Bracket
top Short Bracket
figure 7. A completed stand leg assembly.
x2
leg