Graco VISCON HP 309524L - Manual (Page 8)

Installation
8 309524L
Mounting Heater
Wall Mounting
Bracket 192585
(F IG . 3)
1. Use M8 bolts of appropriate length and lockwasher
(CC), not supplied, to mount bracket.
2. Install two screws (6) and washers (5) into top 2
heater mounting posts (BB) until they are about 1/8
in. (3 mm) from fully installed.
3. Lift heater and slide two screw heads into bracket
slots. Install remaining 2 screws and tighten all 4.
Bracket 183982
(F IG . 4)
1. Mount bracket (MM) to heater with screws (6) and
lockwashers (5) supplied.
2. Use M8 bolts of the appropriate length and lock-
washer (NN), not supplied, to secure the bracket to
the wall.
• The heater has a surface temperature of T2
(482°F, 250°C). Follow temperature code
when locating heater. See Technical Data,
page 28, for more temperature code informa-
tion.
• Heater controls must be easily accessible.
• The mounting surface must be able to support
the weight of the heater and fluid, and any
stress caused during operation.
Need wall bracket 192585 or 183982. See Acces-
sories, page 26.
Use wall bracket as a template to mark bolt holes.
Bracket depth provides required solid object
clearance to comply with European flame proof
standards.
F IG . 3: Bracket 192585
F IG . 4: Bracket 183982
05442
6 in.
152.4 mm
5 in.
127 mm
6
5
CC
BB
YY
8631A
6 in.
152.4 mm
5 in.
127 mm
6
5
NN
PP
MM