Grandstream Networks Grandstream GXP-2000 - Manual (Page 10)

BROADSOFT PARTNER CONFIGURATION GUIDE - GRANDSTREAM GXV-3000 / GXP-2000 DOCUMENT NUMBER
© 2006 GRANDSTREAM. PROPRIETARY AND CONFIDENTIAL; DO NOT DUPLICATE, OR DISTRIBUTE. PAGE 10 OF 25
4 BroadWorks Device Identity/Profile
BroadWorks configurable device identify/profile is introduced in BroadWorks Release
14.0. This section applies only to BroadWorks Release 14.0 and later.
The following table identifies the required BroadWorks device identity/profile settings for
interoperability between the GXV-3000 / GXP-2000 / BT-200 and BroadWorks. For an
explanation of the profile parameters, refer to the BroadWorks Device Inventory Guide
[4] .
For most of the parameters below, an “X” indicates the parameter function is supported
and/or required. If the item is blank, it is not supported.
Grandstream GXV-3000/GXP-2000 Identify/Device Profile
Signaling Address Type IntelligentProxy Addressing
Number of Lines GXV-3000: 3 lines
GXP-2000: 4 lines
BT-200: 1 line
Registration Capable X
Static Registration Capable
E.164 Capable
Trusted
Authentication Override
Video Capable X
RFC 3264 Hold X
Route Advance
Wireless Integration
PBX Integration
Use Business Trunking Contact
Forwarding Override
Conference Device
Music On Hold Device
Web Based Configuration URL http//:%BWIPADDRESS%
Auto Configuration Type 2 Config File
Reset Event checkSync
Enable Monitoring
CPE System File Name gxvSystem.txt / gxpSystem.txt
Device File Format %BWMACADDRESS%.txt